How to clean a comb from hair and dirt

Everyone, without exception, must follow basic rules of hygiene. Brush comb included in this list. Often, hair, dust, sebum, and other formations accumulate in the cavity between the bristles. It is necessary to clean the hairdresser's tool at least once a week, whenever possible more often. The technology of the procedure depends on the material from which the teeth are made and the comb itself. Consider the basic principles.

Cleaning hairbrushes from different materials

Depending on what material is the basis of comb, and vary the rules of cleaning. The problem becomes especially urgent if the instrument is dear to you and you don’t want to spoil it.

1. Tree. Wooden hairbrushes have several advantages. They do not contribute to electrification, treat hair with care, perform their main function well. But the disadvantage of the devices is that they are extremely difficult to clean.Do not wash the comb from wood for too long, otherwise the teeth will fall apart. In such a situation, use vodka, alcohol or Chlorhexidine. Moisten a cotton sponge in one of the selected solutions and wipe each tooth and the cavity between them. Alcohol composition eliminates the remnants of sebum, cotton wool absorbs all the dirt and dust. In the case of heavy pollution, you will have to repeat the procedure several times.
2. Metal. Not the best option for combing, but it's not about that. Metal also can not be permanently immersed in water to avoid oxidation. To begin with, dip the teeth with hot water, but do not touch the rubberized part. Then eliminate contamination by the method described above, use alcohol and cotton sponge. If hair is stuck in the comb, get rid of them with toothpicks. Finally, dry the tool so that the metal does not oxidize.
3. Natural pile. Comb with natural bristles - the best option today. However, such tools are very capricious, quickly polluted and salted. First, arm yourself with a comb and comb them stubble to remove excess hair. Then lower the comb under the tap with warm water, moisten well.Start tapping the bristles on the sink so that all the dust falls out of it. Once again, comb out, gently knock out. Repeat until the comb is perfectly clean. At the end of the procedure, wipe it with a towel and dry it in the sun.
4. Plastic. The material is not difficult in the care, so cleaning will take place quickly enough. First, get rid of hair on the comb using toothpicks or an old toothbrush. Then prepare a solution of 1 l. warm water and baby shampoo. Soak the comb in this composition for half an hour. During the allotted time, all the fat will be exfoliated, you will only need to rinse the comb under the tap and disinfect. Dampen a cotton pad in vodka, wipe the teeth and the rubber cavity. If the contamination is strong, apply baking soda or tooth powder on the toothbrush, moisten, rub the instrument well and rinse.
5. Tourmaline. The material is natural, therefore, requires scrupulous care. On the basis of tourmaline radio components, jewelry, medical devices and hairbrushes are made. The peculiarity of the material is that it is not afraid of exposure to high temperatures.Therefore, you can safely soak the tool in a soapy solution and leave for half an hour. After this time, rub the comb with a toothbrush and soda. You can disinfect with alcohol.

Brush cleaning according to shape

A variety of hairdressing tools is amazing. On the shelves you can find round, flat, square, oval and other devices. Everyone has their own purpose and rules of cleaning.

Thin round hairbrush

1. Perhaps this type of tool is the most difficult to clean due to its peculiar shape. The hair is woven into the teeth and twisted around the rod, which makes their removal difficult. However, there is a way out.
2. First you need to get rid of hair. Arm yourself with scissors for manicure, pry them under your hair and cut them off. It is necessary to make the conditional “circle” of the hair open.
3. Then, using a toothpick, remove the residue and proceed to cleaning from dirt. Mix ammonia with hydrogen peroxide, taking them to 20 ml. Pour this solution into 1 liter. warm water, add 30 ml. shampoo and soak the comb for half an hour.
4. Next you need to rub the comb with a toothbrush or an old clean brush from the mascara, sprinkling the tool at hand with soda. At the end of the procedure, thoroughly rinse the comb.

Massage comb

1. To clean the attribute of dust and hair, it is recommended to resort to using a flat comb. You will also need a solution. Take 1 l. clean water and add 60 ml to it. shampoo, 90 ml. table vinegar.
2. Hold the massage accessory in the composition of a few minutes. Clean off contamination with a flat comb. Dry the attribute thoroughly.

Brashing

1. The fair sex often encounters the problem of dirt and hair accumulating on the brush comb. Clearing an attribute is not easy. As previously described, remove contamination with a toothpick.
2. Next you need to prepare the washing solution. To do this, take a small amount of water, hydrogen peroxide, alcohol and soap. Place the comb in the solution for 1 hour. After the allotted time, rinse the attribute with running water and dry.

Comb cleaning products

Vinegar and soda

1. The cleaning method is one of the most effective. Soda is able to cope with stubborn dirt, table vinegar clears fat well.
2. Before starting the procedure, remove all hair from the comb to the maximum. To do this, use any available method.A flat comb, a toothpick and a needle will help in this.
3. Swipe the tool between the nap and get rid of the hair. Next, dissolve in 1 l. water 30 gr. soda and 50 ml. vinegar. Place the attribute in the finished composition for 10 minutes.
4. If after the procedure there are minor soils, you can remove them with a toothbrush. Wash the brush with running water. Dry the brush with a nap down.
5. It is worth knowing that a similar cleaning method is prohibited to apply to wooden hairbrushes and products with natural bristles. Soda has a destructive effect on similar materials.

Dishwashing liquid

1. The procedure is gentle. With this tool you can handle absolutely any material. As in the first case, get rid of the hair on the comb.
2. Fill a basin with warm water and add dishwashing liquid in the form of a gel. Give preference to a compound that breaks down fatty fibers. Hold the brush in liquid for 20 minutes.
3. After a time, use a toothbrush. Apply to the bristles dishwashing detergent. Begin to clean the pile comb, reaching the base.Wash the tool thoroughly and place to dry on a bristle towel down.

Practical recommendations

1. Follow the simple recommendations and time to clean the comb. Procedures should be systematically carried out for hygiene purposes. Do not forget to remove hair from the instrument every evening. It is necessary to wash a comb at least 1 time in 6 days.
2. Consider, wooden attributes require special attention. These combs are not recommended to be washed frequently. Unfortunately, the dry method of purification does not always cope with complex contaminants. If you frequently wet the comb, it will begin to stratify and lose its original shape.
3. Clean the brush each time before use on clean hair. Use the dry method. Curls will be less dirty and will not leave particles of varnish and other cosmetic compositions on the bristles.
4. If you use a method of cleaning with vinegar, add a few drops of any ether to the solution. Oil will kill the smell of vinegar and reward the comb with a pleasant aroma.

Choose the option to clean the comb, depending on what shape the tool has and what material it is made of.Especially carefully treat products with natural pile. Plastics should not be dipped into hot water to avoid deformation. Do not forget to thoroughly dry the device and disinfect.

Video: how to quickly and easily brush your hair comb