How to clean a ceramic pan from soot

To date, leading manufacturers produce a variety of options for kitchen utensils, but not all appliances are high quality. For example, Teflon pans, unlike ceramic pans, distribute heat unevenly. From here there are difficulties with cooking, often the food burns. Ceramics, in turn, effectively conducts heat over the entire surface. The negative characteristic of the material is considered to be the rapid susceptibility to the formation of soot. Utensils require a delicate treatment, which we will talk about today.

Features of the operation of a ceramic pan

1. After purchasing the dishes do not rush to put it into operation. First wash the pan with a foam sponge and a special gel, then dry with a lint-free cloth.
2. When you decide to use the device for the first time, do not pour a lot of vegetable oil.It is enough to moisten a silicone brush in it, and then lubricate the work surface.
3. The main condition for the operation is considered careful handling. Never expose ceramics to sudden changes in temperature. Immediately after cooking, allow the pan to cool or pour it with water of the appropriate temperature.
4. During the cooking process, do not mix components with an iron spatula. For these purposes, use a bamboo, silicone, wooden or nylon spoon. Otherwise, you will permanently ruin the work coverage.
5. When caring for ceramics, it is strictly forbidden to use chlorine-containing preparations, alkaline compounds, as well as products with abrasive particles of any size.
6. After cooking, do not set the pan aside. Dampen a soft sponge or gauze cloth folded in several layers in hot water, gently wipe the cover. Such a move will prevent further education of soot.
7. If you are careful with the dishes, then at the end of cooking manipulations, soak the pan with hot water and a cleansing gel. Leave on for 30–45 minutes, then wash in the usual way.Always wipe the kitchen utensils with a soft cloth after rinsing.

Effective ways to remove soot

The method of cleaning carbon deposits from ceramic surfaces is directly related to the degree of contamination. Choose the appropriate option, then follow the instructions carefully.

Method number 1. Vodka

1. If the ceramic coating is not too dirty, try to wipe it off with vodka or ethyl (medical) alcohol. To carry out the manipulations, moisten the cosmetic sponge in the composition, begin to scour the carbon deposits.
2. For convenience, you can use a foam sponge or a bandage folded in 5 layers, it all depends on the tools at hand. If the material is contaminated, replace it with a new one or remove the ashes with water.
3. After the procedure, rinse the pan with warm water, wash with dishwashing liquid. Do not forget to wipe dry the inside.

Method number 2. Laundry soap and soda

1. Prepare enameled utensils of such size that a pan fits into it. Pour hot water into the pot, filling the cavity to 70%.
2. Put the container on the stove, bring to a boil.Grate half a bar of laundry soap to fine chips, send inside. Stir to dissolve, add 135 gr. drinking soda.
3. Boil the solution until it becomes homogeneous. Next, put the pan inside, reduce heat to the minimum mark. Boil the dishes for 1.5 hours, then rinse with hot water.

Method number 3. Glue and dishwashing liquid

1. The technique is considered to be the most extreme, so many housewives are afraid to use it. To prepare the composition, prepare 60 ml. silicate glue, 260 gr. iodized salt, 150 ml. means for washing dishes or household appliances (free of chlorine and alkali).
2. Prepare an old saucepan, which is not a pity to spoil. Pour 5-6 liters into it. water, bring to a boil, add cooked means. Reduce the burner to a minimum, lower the pan inside. Boil for about 3 hours, the duration depends on the thickness of the soot.
3. After completion of the manipulations turn off the stove. Leave the ceramic pan in the solution until the liquid cools. Next, clean the peeled off carbon with a strong jet of warm water, a soft sponge or gauze.

Method number 4. Acetic solution

1. Vinegar is a composition concentration of 6-9%, not more. You can use both table and apple, wine product. To prepare an effective means of purification, dilute the vinegar with water in a ratio of 1: 1.5.
2. Pour the composition into the pan, put the dishes on a slow fire. Boil the liquid for at least 2.5 hours, after the procedure, leave the agent to cool completely. Remove carbon with foam sponge and dishwashing liquid.
3. If it is necessary to clean the outside, act differently. Pour the solution into a wide dish, place a griddle in it and put it on a fire. The duration of languor remains unchanged.

Method number 5. Activated carbon

1. Take 20-25 tablets of coal, mash it into a powder in a convenient way. You can use a blender, garlic press or pestle for potatoes.
2. Rinse the pan with water, pour the surface with soot with dishwashing detergent. Spread gel evenly, sprinkle with activated charcoal.
3. Wait 45-60 minutes. After a specified time, rub the dirt with a sponge or gauze. If necessary, perform the manipulations again.

It is easy to clean the ceramic pan from soot, following the step-by-step instructions. If the spots are small, remove them in a timely manner. For these purposes, you can use "Fae", "Eared Nannies" or "Komet", the listed tools perfectly dissolve the fat and any neoplasms.

Video: how to clean the grid from carbon without chemicals