The content of the article
Spilled green linoleum - a real attack for any hostess. Many people know that an emerald-colored solution has an unpleasant feature to enter the surface in a matter of minutes. As a rule, it is rather difficult to remove from the structure of the coating, especially for old stains. You can not remove the stain with ordinary water and a sponge, it requires a more radical approach. Experienced housewives through trial and error brought effective home remedies that will help to cope with the problem. Consider the ways in order, select the main aspects.
How to remove green from linoleum: the first steps
- If you just drop a bottle of green on the floor, first of all you need to collect the remnants of the coating. Otherwise, the emerald drug will be firmly injected, it will be much more difficult to withdraw it.
- Absorb the remnants of the funds will help any available tools that can absorb moisture. This may be a gauze fabric, cotton wool, old rags, in case of emergency, toilet paper.Do not smear the little green on the surface, dot the drug wet, not allowing it to creep apart.
- Next, you need to prepare a solution. Wear gloves, protect airways and eyes. Pour warm water into the basin, add a cap of bleach or any other caustic bleach. Optionally, you can replace the product with soap, pre-crushing bar with a grater.
- After preparation of the solution, moisten a sponge or a hard rag, begin to rub the stain intensively. Try to make the trail dull, as inconspicuous as possible. After that, fold the gauze in 5-6 layers, saturate it with hydrogen peroxide, apply to the place of pollution, press. Wait for about 10 minutes, then remove the fabric and wipe again with mint soap solution.
Effective ways to remove greens from linoleum
Hydrogen peroxide
One of the most common methods of removing greens from the surface of linoleum is the use of hydrogen peroxide. The main thing is that the concentration of the drug was not lower than 6%. Optionally, the peroxide can be replaced by "Chlorhexidine", which is sold in a pharmacy.
To remove the emerald wake, prepare an old piece of terry towel. Dampen it in preparation so that the liquid drains. Place the fabric on the stain, leave for 10 minutes.
After the specified period the trace will brighten, carry out the previous manipulations as many times as necessary. During processing, the coating will lighten, so you need to wipe not only the stain, but also the area around it (so that transitions are not visible).
Acetone
Take a clean acetone, soak a thick piece of cotton wool in it, then start to process the stain with wetting movements. Change the wool as it gets dirty, do not press hard.
Nail polish remover
If it is not possible to purchase acetone, use a nail polish remover to which it is a part. It is possible to effectively remove any kind of pollution in the following way: soak a thick cloth in the solution, apply it to the stain, press it, and leave it for 25 minutes.
After the expiration of the specified period, lightly rub and blot the stain, evaluate the result.Treat the contaminated area, starting at the edges, gradually moving towards the center.
Potassium permanganate and table vinegar
Mix potassium permanganate with table vinegar (9% concentration) so that you get a raspberry-colored solution. Dampen gauze or clean rags in the prepared preparation, process the stain well (do not smear it!).
After such manipulations, the trail from the green will take on a pink hue, at which point you need to repeat the procedure again. The stain will turn brown, wipe it with a clean cloth dipped in hot water, and dry with paper towels.
Ordinary hydrogen peroxide with a concentration of about 6% will help to completely discolor the contaminated area. Moisten a cotton wool or rag in the preparation, apply it to the stain and press it down. Wait 2-3 minutes, evaluate the result. If necessary, re-bleach, replacing the dirty cloth with a clean one.
Drinking soda and vinegar
Due to the chemical reaction obtained using drinking soda and ordinary vinegar, the green will dissolve and partially discolor. Prepare porridge from the listed components in such a wayto make up enough to cover the stain several times.
Spread the mass in a very thick layer, cover with food film or bag, leave for 5 minutes. Soda will begin to pull out a little bit of green, so the pulp must be periodically updated.
To completely discolor pollution, repeat the procedure as many times as the situation requires. At the end of all manipulations moisten gauze in vinegar and carefully wipe the surface.
Camphor alcohol
Before treating the stain with camphor alcohol, clean the contamination with soapy water and wipe dry. Next, moisten a large piece of cotton wool in the product, begin intensively rubbing a trace of the green. Change the wool as it is used, it should always be clean.
As in the case of peroxide, it is not enough to process only the stain. Wipe the entire flooring so that the boundaries of the clarified area and the shade of the coating do not greatly differ. Finish cleaning the cover by wiping it with a cloth dipped in vinegar.
Powder "automatic"
To prepare the composition you will need to take the powder "machine" with bleaching particles.Prepare a paste-like mass from the bulk composition and water. Spread the gruel over the surface of the stain, rub well and cover with food film, leave for a few hours (if possible for the whole night).
After the specified time, remove the residue with paper towels, prepare a soap solution. Rub a third of the bar of household soap, dissolve it in boiling water and cool. Moisten in the composition of the rag, wipe the linoleum.
Ethanol
Ethyl, it is medical, alcohol is used to remove stains of varying complexity (coffee, wine, fuel oil, rust, etc.). For this reason, it makes sense to consider the cleaning technology in more detail.
Moisten in medical alcohol gauze, folded in 5 layers. Go through the pollution, try to remove the stain as effectively as possible. Start cleaning from the edge, gradually move to the center.
When you notice that the trace has brightened considerably, soak the old towel in alcohol and apply it to the stain. Leave for 2 hours, periodically evaluating the result. The contamination should become colorless; perform the actions until you achieve the desired effect.
Bleaching powder
The drug is an effective means of disinfection, it can be purchased in supermarkets, hardware stores and even a pharmacy. For cleaning, you need an agent that is available in powder form.
The composition must be diluted strictly according to the instructions. He can easily remove the stain of greens, but the smell of chlorine is quite specific. Before the procedure it is recommended to remove children and animals from the room, as well as to open all the windows.
Dilute the preparation, apply it on the contaminated surface, wait 7-10 minutes (the exact interval is specified in the instructions). At the end of the period, the coating should be thoroughly washed several times, then wipe dry.
Dentifrice
Prepare a pasty mass by mixing the tooth powder with running water. Spread the composition over the contaminated area, wait 2 hours. Rub the stain from the green with an old brush, evaluate the result.
If you are not satisfied with the result, dilute the powder with table vinegar with a concentration of from 6 to 9%. Clean in the same way. After all manipulations wash the floor in the usual way.
Salicylic alcohol
An effective tool that copes with pollution of any kind. To remove green spots, you must use only pure salicylic alcohol, without diluting it with water. Moisten in the composition of the old rag, intensively wipe the green areas for 10 minutes.
If you are not satisfied with the result, act differently. Soak a large piece of cotton wool in salicylic alcohol, attach it to the coating, leave for 1 hour. Now prepare the solution by diluting the soap shavings in water. Wipe the floor with a sponge moistened in the resulting composition.
Stain remover
The most popular and at the same time effective drugs are Antipyatin, Minute, Sarma, Ecover, Vanish, Amway, Domestos, Ushasty Nyan, Edelstar.
To properly use the composition without damaging the coating, apply it on the stain and wait half an hour. After that, wash the linoleum with clean water and any means for treating the flooring. If necessary, carry out processing again.
Zelenka is a complex type of pollution, therefore it is necessary to use effective means. Use hydrogen peroxide, acetone, nail polish remover, manganese, and vinegar. Do not forget about ethyl, camphor, salicylic alcohol, powder "automatic" and bleach.
Video: how to wash Zelenka from the skin
4 votes, on average: 3,25 out of 5
To send