How to clean the rabbit fur at home

Rabbit fur is very popular, they make hats, fur coats, collars. Over time, the product wears out, is erased, as a result of which there is a need for cleaning. It is important to understand that rabbit fur is a soft and delicate material that does not withstand heat treatment. Folk remedies designed for cleaning products of this kind will help to restore the former brilliance and beauty.

Effective ways to clean rabbit fur

Before proceeding with the cleaning of the product with folk remedies, conduct a preliminary test on an inconspicuous area. Apply detergent, wait a quarter of an hour, remove it and evaluate the result. If the fur coat is not shed, feel free to proceed to the procedure.

Hydrogen peroxide

Semolina
For the procedure, you will need a vacuum cleaner (a compact car will do), a basin, semolina or potato starch (about 1.8 kg.). If your fur coat is very dirty, unplug the fur from the lining beforehand, wash 2 parts separately. Pour 10 liters of warm water into the container, add the semolina or potato starch. Dip the fur in the mixture, rinse well and shake well. At the end of all manipulations, walk on the surface with a vacuum cleaner with a soft nozzle, spread out the fur coat on a flat table, lay a white sheet. When the cleaning is completed, sew the lining and wear it with pleasure.

Oat bran
Wash the pan with a non-stick coating, dry, pour 100 grams into it. oatmeal or flax bran. Turn on the stove and heat the composition, but in no case do not fry.After that, spread out a fur coat on a flat surface, sprinkle it with heated bran and rub well. If the composition is not enough, cook more. At the end of the rubbing in, the fur should be carefully combed out with a special comb in the direction of the nap and hung on the hanger until completely dry. Then again it is necessary to process the surface with a clothes brush, trying not to damage the fur. Some mistresses in the absence of a comb using a regular broom. In this case, there is a risk of contamination of the product.

Table Vinegar
The composition is used to make hair silky and soft delicate fabrics. For this reason, it is used in the cleaning of fur products. To prepare the solution, you will need table 9% vinegar diluted with filtered water in a ratio of 1: 2. Immerse in the resulting composition of a cosmetic swab, spend them on the growth of villi several times. Do not attempt to wipe the stain with strong pressure, proceed with caution. After all manipulations, wipe the fur with a damp cloth, dry naturally (away from ultraviolet light) and comb.

Important!
Since rabbit fur is extremely delicate, only a mild acetic solution should be used. If you apply essence, dilute it with water at the rate of 100 ml. product to 1 liter of purified water.

Baby powder
Get in the pharmacy baby talc with chamomile or without fragrances. The method is considered dry because it does not require pre-treatment with water. Cover with talcum powder the entire surface of the product, rub it well into the pile. Leave for 15 minutes to soak up possible dirt and grease stains. After the expiration date, shake the fur coat so that the talc is sprinkled, vacuum it. Comb the product with a soft brush with a frequent arrangement of the teeth (suitable tool for animals). Also remove the remnants of funds will help hair dryer (cold airflow) or a fan. You can replace the talc with wheat flour, the principle of action is identical: poured, ground in, removed with the help of household appliances.

Petrol
Prepare corn starch in advance, clean gasoline (suitable for lighters) and a brush for fur products. Before proceeding to the treatment, open all the windows, carry out the procedure away from open flame. Keep children and pets out of the room.Shake the fur coat several times, if possible “knock out” dust from it in a convenient way. Take 100 gr. starch, fill it with gasoline in such a way as to obtain a creamy mixture. Rub the composition against lint, shake, repeat the previous steps a few more times. After all the actions, comb the fur coat, removing the remnants. The smell of gasoline disappears within 2-3 days.

Practical advice

1. Since rabbit fur is extremely soft, it is impossible to use hard brushes for floor surfaces, this error is considered to be the most common when processing products. After cleaning the rabbit fur coat, you must comb it with a soft clothes brush, then put on the cover and put it in the closet.
2. With regards to winter storage, the product must be dried naturally before being hung on hangers and put away in a closet. At the same time keep the fur coat away from radiators and other heating devices.
3. Very often the white rabbit fur coat begins to turn yellow. To prevent such consequences, place it in a cover of dark (possibly blue) color of a rag or paper form.Choose a cool place to store. Ensure that there is no moth or mold in the closet. At the same time after placing the coat should hang freely, otherwise when the season comes it will be difficult for you to bring a nap in order.
4. For cleaning small items such as a hat or collar, gel-based cleaners are used. Dilute the drug cap in warm water, then dip and rinse the item several times, do not wring it. Hang on a hanger and let the excess water flow. Send to dry in fresh air, avoid exposure to heat appliances and direct sunlight. Throughout the drying process, periodically comb the fur, do not let the fibers stick together.
5. In cases when it is necessary to wash the lining on the cap, pull out the inner part, and pull the fur on the three-liter jar. Treat the pile with steam, rinse the lining in water with the addition of powder. Dry the products and fasten them together.

Not many folk remedies have been developed for cleaning the rabbit fur coat, but the above recipes are notable for their ease of preparation and the available components.Use liquid ammonia, 9% vinegar solution, pure gasoline, fragrance-free baby powder or semolina. Do not forget to do a preliminary test before each treatment.

Video: how to clean a fur coat