How to clean a fur collar at home

Fur products have gained wide popularity due to the high thermal insulation properties and aesthetic appearance. Most of the outerwear includes a natural pile collar, which has the unpleasant feature of getting greasy and losing its former gloss. Experienced housewives clutch their heads, not knowing what to do. There are effective ways to clean the fur collar at home. It is often used improvised means, such as soap solution, wheat flour, starch, chalk, gasoline for refilling lighters.

Method number 1. Soap solution

1. In order to clean the fur product, it is enough to apply hair shampoo. If you do not trust simple methods of cleaning, use a professional composition, which can be purchased at leather goods stores.
2. Start the process of cleaning fur.Take the collar with one hand, and with the other hand start gently knocking out dust with your palm or cardboard tube. Then comb out the fur with a special brush based on natural lint. This way you will remove sticky hairs and clumps of contamination.
3. If you decide to use regular shampoo, pay attention to the composition. The product should not contain excess impurities and air conditioning. Such smoothing additives have a detrimental effect on the structure of fur. Take a small oilcloth, spread a full-length collar on it.
4. Take a basin, dilute 60 ml. shampoo in 2 liters. warm purified water. Beat the composition with a hand in a dense foam. To simplify the task, use a colorless foam sponge. Next, dip the pile in the shampoo and slightly squeeze it, leaving the fur moist. Spend a sponge on a collar, not allowing a strong wetting of the core.
5. A large amount of foam should remain on the fur collar, which will absorb excess dirt. Use a gauze cloth to remove it. Send the thing to fresh air, make sure that the dust does not settle on the collar. Wait until the nap is dry.You can also use gel powder, natural soap with the absence of paints, substances for washing wool.

Method number 2. Starch

1. If the collar is detached from clothing, starch will help you. To do this, take a plastic bag, place a fur product in it.
2. Sprinkle with vase starch, shake the bag. Take a brush, start cleaning the fur through polyethylene. After completing the procedure, remove the collar, shake and air it.

Method number 3. Flour

1. Knock out the collar villi, ridding the fur of accumulated dust. Sift the flour into a clean container. Comb the fur, place it on a piece of food film. Dust the surface of the pile with flour, brush it against the pile.
2. Next, rub the flour is not circular motions for 5 minutes (in a straight line, back and forth). When cleaning the flour will begin to darken, knock it out, comb the collar with a wooden comb. For better purification repeat the manipulations.

Method number 4. Petrol

1. If on a fur collar zalosnivshiesya places or greasy stains were formed, starch (preferably on the basis of corn), as well as refined gasoline will help to eliminate the problem (suitable for filling lighters). Combine substances to obtain a liquid homogeneous mass.
2. The cleaning procedure is carried out in a well-ventilated area. Spread unnecessary sheet, put a plastic wrap over it.
3. Carefully discourage the collar from dust. Comb the fur, apply the finished mass to the entire surface of the product. Try not to touch the leather base of the collar. If we neglect this point, the core will harden and deform.
4. After you have applied the gasoline base to the nap, leave the collar to dry in a well-ventilated area. Then knock out the collar and comb out the remaining starch with a wide comb. Ruffle the villi.

Method number 5. Bran

1. In this case, the cleaning process takes place with the help of wheat or rye bran. To begin the cleaning process, you will need 350 grams of bulk composition.
2. Take a pan with a non-stick coating, add bran, send it to the stove. Heat over low heat, stirring constantly.
3. Then put the collar on a clean cloth, begin to sprinkle with hot bran. Gently rub in the product, leading the palm against the nap.
4. Comb the fur with a comb with sparse teeth. Dispose of the rest of the composition with a wooden tube.If necessary, clean again. In no case do not allow the burning of bran.

How to clean a white fur collar

1. Often, owners of collars of light fur come to the fact that the pile turns yellow and loses its original appearance. Therefore, this type of products often needs to be cleaned. Assistant in the procedure is hydrogen peroxide.
2. Combine the peroxide (3%), 250 ml in one mass. warm water, 2 g. ammonia (ammonia). Shake the composition and pour into the spray.
3. Lightly repel and mop the collar, put on a plastic film. Spray with a diluted composition of fur, dry under direct UV light. In case the villi are not completely brightened, repeat the procedure.
4. After the fur is dry, it may appear dull and dull. Add shine to the collar with 6% vinegar or glycerin at a concentration of 10%. Take a lint-free cloth, apply one of the formulations on it, wipe the fur. Dry in fresh air.

Cleaning the fur collar from dust and dirt

1. Using an air jet from a hairdryer, you can check the degree of contamination of the fur.If the villi scatter in the direction of flow, then returns to its original state, with the fur glistening, the product does not need to be cleaned. If the fur, on the contrary, is stuck together in places and looks greasy, the product needs help.
2. Wrap the collar with a damp gauze cloth and gently remove the dust. It is better to perform such manipulations on the floor, putting the fur pile down.
3. Small items, such as a collar or hat, can be cleaned using steam heat treatment. For this operation, use steam cleaners or iron with the appropriate function. After processing, dry the fur.
4. Use lemon juice, diluted in half with water. The solution cleans well of dust, dirt and gives shine, returns the original appearance. Take a microfiber cloth, wet it in the composition, leave it slightly moist. Then wipe the fibers, dry the fur product, comb it with a comb.

When contaminated fur products do not necessarily run dry cleaning. You can carry out cleaning manipulations on your own, saving your hard earned money. To begin the procedure, conveniently place the product on a floor or other flat surface.Test the product that you are going to use on an inconspicuous section of fur. Start processing, evenly distributing the composition. Do not forget that the base (core) can not be wetted heavily. Otherwise, the product will lose its shape, an expensive thing will simply deteriorate.

Video: how to clean a fur collar